Powerdynamo para DKW NZ250/350

System 70 25 799 00 => €/$	generator/electronic ignition for DKW NZ250/350 to replace the large stock dynamo in engines with aluminium carter and the large round dynamo cover
	Unfortunately we get often customers who confuse this with the system for DKW NZ 350-1. This system is totally different! The 350-1 had a much smaller dynamo and der carter was made of cast iron.
	Replaces the complete stock dynamo ignition, upgrades to 12V/180W and solid state ignition. May be driven completely without battery (but take note of limitations) Ignition is static as with the modern carburants and the high tension ignition there is no need to have reduced advance at startup. Rotor weight in System 70 25 700 00 (127mm diameter) is 2kg in place of formerly 5. This reduces wear on bearings and gives smooth driving. No need for mechanical changes on engine block (except to enlarge wire exit hole by 2mm)
advantage over original system	all parts are new more light output very stable ignition with solid spark better starting, better fuel burning no wear anymore on points no delicate centrifugal governor
Documentation:	assembly instructions wiring diagram parts in the pack (foto)
Fotos:	engine with the system the new stator the new rotor stator during assembly rotor in ignition position the only small mechanical modification - enlarged wire exit hole example how to fit ignition coil example how to fit regulator the stock stator pulling the stock rotor



	Powerdynamo regresa el encendido y la luz a su moto clásica