solid state ignition for Adler M/MB 200/250 racing ignition

Highspeed (up to 18.000rpm) magnet based solid state ignition for vintage bike racing applications.
At 18.000rpm (i.e. 36.000 sparks/min) still 25 Kilovolts output. (3.000-8.000rpm = 40kV, see diagram). Diameter of rotor is 59mm, rotor weight is 210 gramms. 

Note: No facility for lighting provided!!
No lights - no use on public roads! (consult national regilation)

• all parts are new
• very stable ignition with high energy spark
• better starting and fuel burning, increases engine performance
• no problem with points anymore
• very lightweight, rotor at 210gr, total system at 850gr

• assembly instructions
• wiring diagram
• parts in the pack (photo)
• output diagram
• timing diagram
• dimensions of double ignition coil
• dimensions of stator and rotor

• view at installed system
• photo ignition coil
• photo backside stator