generator/electronic ignition for engine Sachs SM51 (125ccm, early 150ccm) and Sachs 100/3
with small cover (155mm)

The system is available with  0,7kg rotor (70 35 799 00) or with 1,8kg rotor (70 35 799 HR) 
for 150ccm recommendation is HR

For the engine Sachs SM51 150ccm with large cover (189mm) see our system 72 53 799 00.

Magnet based generator with integrated fully electronic ignition. Output at 12V/180W DC. Solid state ignition with own power supply from within the system. Replaces old 6V Bosch LM/UT/1/142/30L6 dynamo. No changes on engine casing needed. The system is technically capable of running without battery.

Should you want to change from the standard PD system with small rotor to the HR version, you need to replace the flywheel and the ignition coil.

• all parts are new
• more light output
• very stable ignition with solid spark
• better starting, better fuel burning
• no wear anymore on points

• assembly instructions light (normal) version
• assembly instructions HR version
• wiring diagram normal version
• wiring diagram HR version
• parts in the pack (photo)
• the HR rotor

• engine with the system
• view at the stator
• view from the side
• rotor at ignition position