Powerdynamo, puller tools for Powerdynamo rotor

Only in very few cases your stock rotor puller will be suitable for the Powerdynamo rotor.
inversely, only in very rare cases can the Powerdynamo puller pull your stock rotor.

Never use a hammer or a claw or clamp puller to pull Powerdynamo rotor. This would damage the magnets, even plastified ones.

We are amazed how many customers ignore our suggestion to buy a puller together with the system, which often than results in a puller beeing ordered later at disproportionate postage cost. There had been a time when we had added always a puller with the systems. This resulted in us beeing critised for wastage as especially commercial customers already had a few of them.
In our product information (in shop via link "full product information here") you can find out whether a puller is included. This will always be the case if the puller is not our standard puller but some special tool. In systems where you can use the standard puller it is never included by default and has to be ordered as a separate.
Puller for stock material can be of various forms. We offer a very limited range of them.

This is the standard puller. never supplied with a kit

puller tool (M27x1.25 / M12) /
screw (M12x90)

rotor holder tool
To hold the rotor during assembly.