Powerdynamo brings new ignition & light |
||
Is a Powerdynamo Magdyno used in a system without any battery, you will IMPERATIVELY NEED a condenser > 22.000µF in place of the battery. Failing this, there will not be full lighting power at the headlight. Reason for this is the special way the regulator inside the magdyno works. You will not need the condenser if there is a battery, but you may leave the condenser installed in parallel to the battery. |
|
Condenser
for PD magdyno, part 70 22 000 00 (Link to shop)
The condenser has (like the battery) a plus and a minus terminal and
gets connected as if it was the battery.
Note: Never confuse the terminals. The plus terminal always to plus of system and minus to negative ground. |
|
|
|
physical information: |
diameter 35mm length over terminal screws 90mm capacity 22000 µF screw terminals M5 |